Servicing all of Greater Hickory Area

Dynaco Slimline Stainless

Optimize your cleanroom

The DYNACO SLIMLINE STAINLESS flexible, high performance door ensures a tight seal for clean rooms, keeping stable pressure levels and protecting against contaminants. The high performance door enables airlocks that correct pressure differentials, and the flexible PVC door current is pressure resistant. Benefit from significant energy savings while keeping contaminated air out and clean air in with DYNACO’s superior and tight seal.

Minimize air leakage and save energy costs

The fast-action door with rapid open/close speeds limits the time the door remains open. This minimizes the loss of expensive climate-controlled air and optimizes your cleanroom operation. The DYNACO SLIMLINE STAINLESS high performance door requires little maintenance, due to its low-friction side guides, self-reinserting door curtain and few wearing parts. With no rigid curtain elements, this flexible door is safe for staff and equipment

  • Keep open time to a minimum
  • Rapid door cycle of up to 1,2 m/s open speed, 0,5 m/s close speed
  • Conserve energy and reduce air leakage
  • Patented side guides and superior seal design
  • Control pressure levels
  • Pressure resistant flexible PVC door curtain
  • Restrict contaminants and airborne particles
  • Full-perimeter door seal
  • Keep employees and equipment safe
  • No rigid elements to damage objects or injure staff
  • Operate in silence
  • Low-friction technology guarantees silent open/close

Maximum height: 12′

Maximum width: 12′

Opening speed: 48 in/s

Closing speed: 24 in/s

Dynaco Freezer M2

Limit cold air loss and save energy costs.

Quickly move people and products in and out of your freezer room with the DYNACO Freezer M2 high performance door. The superior seal minimizes temperature loss and temperature variation to save energy and costs.

Limit condensation and ice build-up with an optional insulation curtain mounted on the high performance freezer door that produces an additional barrier to keep warm temperatures out and cold temperatures in.

Reduce downtime and save costs.

Avoid the downtime of de-icing with our heated side guides and optional insulated curtain and defrost system. Reduce maintenance downtime with the self-reinserting door curtain that ensures reliability and durability.

Standard soft curtain design prevents hard edge accidents. No rigid bottom bars to injure workers or damage equipment.

  • Conserve energy
  • Short open/close and tight seal control temperature variations
  • Improve refrigeration efficiency
  • Automatic and rapid door cycle optimizes your freezer room
  • Reduce frost buildup
  • Optional insulating curtain and defrost systems reduce condensation
  • Reduce maintenance costs
  • Self-reinserting door curtain minimizes downtime and maintenance
  • Keep people and products safe
  • Flexible door curtain is designed without rigid components

Maximum height: 15′
Maximum width: 15′
Opening speed: up to 96 in/s
Closing speed: up to 48 in/s

BROCHURE

Dynaco Dynarigid

Keep your investment safe.

When interior or exterior security is a concern, the DYNARIGID provides protection with its solid door leaf composed of high-grade aluminum slats. You receive all of the benefits of a high performance door with the protection of a rigid roll-up door that is designed for fast open/close operation to ensure optimized logistics and a continual flow of traffic.

Protect against intruders and bad weather

The solid DYNARIGID high performance door has built-in safety features that protect against intruders while preventing incidents and injuries, with optional transparent vision panels for increased safety and visibility. We’ve designed the DYNARIGID for easy maintenance. Damaged aluminum slats are simple to replace. With appropriate safety measures, the rigid high performance door can continue to operate with one or more missing slats.

Maximum height: 16′
Maximum width: 17′
Opening speed: up to 96 in/s
Closing speed: up t 24 in/s

  • Protect against intruders and bad weather
  • Solid door leaf from high grade aluminum slats
  • Optimize traffic and material flow
  • High opening and closing speed
  • Prevent prolonged downtime
  • The door can continue to operate even with one or more missing lamellas, provided the necessary safety measures are taken
  • Keep people and equipment safe
  • Light curtain integrated in side columns can prevent accidents
  • Enable easy maintenance
  • Replace damaged lamellas easily
  • Add more safety and visibility
  • Transparent vision panels are optional

Hormann-Flexon HFCB Control Box

HFCB CONTROL BOX ACCOMMODATES STANDARD POWER SOURCES

Our HFCB control box is standard on the following models: Speed-Commander™ 1400 SEL, Speed-Commander™ 1400 SEL Clean-Master, Speed-Commander™ 1400 SEL Cool-Master, Speed-Commander™ 1400 SEL Food-Master and Speed-Master® 1600 L up to 10’0″ wide x 10’0″ high. The HFCB control box is hardwired and standard with a 230 v / 1-phase / 60 Hz / 3-phase output power requirement. Optional are both the HFC1 3-phase, hardwired control box and the proven and tested Smart Start™ HFC1 plug-and-play 3-phase control box, when UL approval and ultimate operational speed is required. This range of control box options enables customers to control costs through choosing the style of control box just right for their application.

Hormann-Flexon Machine Protection

CLASS 4 SAFETY SWITCH

Standard on both the Speed-Commander™ 1400 MP and Speed-Master® 1600 MP are class 4 safety switches which signal that the door is verified closed. Personnel working nearby can rely on the door being in the closed position when it should be.

SINGLE PHASE CONNECTION / 3-PHASE DRIVE

Both machine protection models accommodate the standard power sources readily available in most facilities. The HFCB control box is hardwired and standard with 230 v / 1 phase / 3 phase output power, for an opening speed up to 80″ per second. When UL / CUL approval is required, the HFC1 3 phase, hard-wired or Smart Start™ HFC1 3 phase control boxes are options.

Optional UPS Emergency Battery Pack – Available with doors equipped with our 230 v / 1-phase HFCB control box. With this option, if power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area.

SECTIONAL PANEL DESIGN AND TWO GRADES OF MATERIAL AVAILABLE

Both the Speed-Commander™ 1400 MP and the Speed-Master® 1600 MP come in a sectional panel design. The panels are connected using horizonal aluminum profiles that allow for fast and easy panel replacement when required (Speed-Commander™ 1400 MP shown on left). The model 1400 MP is perfect for areas with little to no air movement and is standard with a 58 oz. / sq. yd. reinforced PVC panel. The model 1600 MP is recommended for use in applications that have noticeable air movement / pressure, and the 90 oz. / sq. yd. Bulldog XT panel is standard. See below for color choices for both models.

Application/ Size Range

Application / Size:

  • Interior applications up to 10’0″ wide x 10’0″ high.

Operating Speed:

  • Opening: Up to 80″ per second.
  • Closing: 30″ per second.

Panel – Model Speed-Commander™ 1400 MP:

  • Anti-static, puncture resistant, nylon-reinforced PVC material.
  • Weight: 58 oz. / sq. yd.
  • Tear strength: 440 lbs. / sq. ft.
  • Temperature rating: -22°F to +158°F.

Colors – Model Speed-Master® 1600 MP

  • Black
  • Blue
  • Orange
  • Grey

Vision

Full-width x 35″ high, clear PVC, starting at approximately 52″ from the floor. The panels are connected using aluminum profiles and have specially designed edges that allow the panels to slide easily into the horizontal aluminum profiles for fast replacement.

Guide Tracks

  • Standard
  • Heavy-duty, 12 gauge, galvanized steel with removable front covers. Guide tracks are 7-1/4″ wide x 4-1/2″ deep.
  • Optional
  • Stainless steel.

Direct-Drive Motor

Compact, self-monitoring direct-drive motor has a patented built-in safety brake and is maintenance free.

Control Box

  • Standard: HFCB 1-phase, hardwired.
  • Optional: HFC1 3-phase, hardwired or Smart Start™ HFC1 3-phase.

Safety Devices

  • Standard: Class 4 safety switches.

Custom Panel Prints

Make an impression with our customized panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.

Hormann-Flexon Rubber Doors

THE ULTIMATE IN DURABLE CONSTRUCTION

The 4600 rubber series doors are constructed of SBR (styrene-butadiene rubber) reinforced material that is composed of two layers. Each layer is 1/8″ thick for a total thickness of 1/4″. This maintenance free material provides superior panel strength and durability, maintaining performance in a temperature range of -40 degrees F to +180 degrees F. The robust panel along with one-half inch thick windlocks keep the panel in place with wind pressure up to 88 mph. Heavy-duty structural steel guide tracks are low-profile, occupying only 4″ on each side of the door opening. The tracks contain a smooth windlock edge which eliminates the need for panel breakaway tabs, simplifying panel re-insertion if necessary.

MINIMAL MAINTENANCE AND EASY REPAIRABILITY

If contacted, the wireless reversing edge immediately reverses the door, which reduces the chance of damage and promotes protection of personnel and goods. Upon impact, the shear bolts on the bottom angle shear allowing the bottom angle to release.

WALL MOUNTED CONTROL BOX INCLUDES 3-BUTTON PUSH BUTTON

The models 4600 RS and 4600 RD open with a GFA direct-drive motor and are standard with a wall mounted control box that includes a 3-button push button for basic operation. The 4600 RE economy model has the control box location at the motor. All models include NEMA 4 photocells which automatically reverse the door if the beam is interrupted. An emergency chain hoist allows ror emergency opening of the door during a power outage. Activation is optional: pull cord, motion detector, induction loop detector and remote control.

Application/Size Range

Application / Size Range

  • Interior or exterior applications.
  • Up to 40’0″ plus wide x 30’0″ high.

Operating Speed

  • 4600 RE: Up to 12″ per second up and 12″ per second down.
  • 4600 RS and 4600 RD: Up to 36″ per second up and 14″ per second down.

Panel

  • 1/4″ thick SBR (styrene-butadiene rubber), 1 ply with double layer of polyester reinforcement.

Vision

  • Optional: Two each 10″ wide x 18″ high clear PVC windows.
  • Consult factory for additional windows.

Colors

  • Blue
  • Consult factory for optional colors.

Guide Tracks

  • Standard: Heavy-duty, structural steel, low-profile, 4″ wide. Tracks contain smooth windlock edge, eliminating the need for breakaway tabs.
  • Optional: Stainless steel.

Motor

  • 4600 RE: Industrial GHC Series, spring-assisted.
  • 4600 RS: GFA direct-drive.
  • 4600 RD: GFA direct-drive with soft start and soft stop.

Control Box

  • 480 v / 3-phase / 60 Hz / 3-phase output power requirement.

Safety Devices

  • NEMA 4 photocells.

Warranty

  • Five years on the motor / gearbox. Lifetime on the SBR panel material. Five years on the EPDM panel material.

Hormann-Flexon Screen-Master® Automatic Roll-Up Barrier

Screen-Master® roll up screen doors keep your work environment clean and keep out airborne contaminants, and are a useful tool for improving quality standards, complying with Good Manufacturing Practices (GMP) and schieving American Institute of Baking (AIB) certification.

ROLL UP SCREEN DOOR MODEL SC-100 AUTOMATIC ROLL-UP BARRIER

  • Maximum size for standard under lintel mounting configuration is 10’0″ wide x 14’10″ high. Optional overhead door stand-off mount has sheet metal sides.
  • 10 oz. per square yard screen panel. Standard colors: Royal blue or black. Consult factory for additional color options.
  • Full-width reinforcement profiles are located in 3″ high, safety orange pockets. (Orange on inside face of curtain only.)
  • 110 volt, UL-rated tubular motor operates the curtain at a speed of 12″ per second up and down. Designed for low-cycle use.
  • One (1) constant contact, UL-rated two-position rocker switch for activation.
  • Heavy duty galvanized steel guide tracks have 2″ low profile projection and are highlighted by safety orange PVC inserts.
  • Foam filled bottom draft seal.
  • 12″ high, 22 oz. blue vinyl head curtain with aluminum clamp strip.
  • One (1) year warranty on parts and workmanship.

ROLL UP SCREEN DOOR MODEL SC-800 AUTOMATIC ROLL-UP BARRIER

  • Maximum size for standard under lintel mounting configuration is 14’8″ wide x 16’0″ high. Optional overhead door stand-off mount has sheet metal sides.
  • 10 oz. per square yard screen panel. Standard colors: Royal blue or black. Consult factory for additional color options.
  • Sectional panel design has three sections, with Speed-Master® style aluminum hinges and bottom bar with breakaway tabs.
  • 110 volt, UL-rated tubular motor operates the curtain at a speed of 12″ per second up and down. Designed for low-cycle use.
  • One (1) constant contact, UL-rated two-position rocker switch for activation.
  • Heavy duty galvanized steel guide tracks with 4″ low profile projection.
  • Cushioned bottom edge with adjustable safety yellow vinyl floor loop seal.
  • 12″ high, 22 oz. blue vinyl head curtain with aluminum clamp strip.
  • One (1) year warranty on parts and workmanship.

Hormann-Flexon Screen-Master® Manual Barriers

ROLL UP SCREEN DOORS MODEL SC-200 MANUAL ROLL-UP BARRIER
  • Maximum size for standard under lintel mounting configuration is 10’0″ wide x 10’10″ high. Optional overhead door stand-off mount has sheet metal sides.
  • 10 oz. per square yard screen panel. Standard colors: Royal blue or black. Consult factory for additional color options.
  • Full-width reinforcement profiles are located in 3″ high, safety orange pockets. (Orange on inside face of curtain only.)
  • 3″ diameter galvanized steel, spring-loaded roll tube.
  • Conveniently located hand straps allow for easy operation.
  • Heavy duty galvanized steel guide tracks have 2″ low profile projection and are highlighted by safety orange PVC inserts.
  • Foam filled bottom draft seal.
  • 12″ high, 22 oz. vinyl head curtain with aluminum clamp strip.
  • One (1) year warranty on parts and workmanship.
MODEL SC-300 AND SC-500 MANUAL SLIDING BARRIERS
  • Model SC-300 is single-sliding
  • Model SC-500 is bi-parting.
  • Maximum size for standard under lintel mounting configuration is unlimited width x 15’0″ high. Extra wide width coverage is achieved by pairing of several sliding barriers.
  • 10 oz. per square yard screen panel. Standard colors: Royal blue or black. Consult factory for additional color options.
  • Galvanized steel sliding track hardware.
  • 3″ diameter galvanized steel, spring-loaded roll tube.
  • 1″ diameter galvanized steel pipe staffs with integral 5/8″ cane bolt floor locking pins. Pipe staffs are enclosed in high-visibility, safety orange vinyl pockets. (On inside face of curtain only.)
  • Nylon cord tieback straps.
  • Tear-resistant vinyl floor sweep gasket.
  • 12″ high, 22 oz. vinyl head curtain with aluminum clamp strip.
  • One (1) year warranty on parts and workmanship.

Hormann-Flexon Smart Start™ HFC1 Control Box

ULTIMATE EASE & CONVENIENCE

Offered as an option on the Speed-Commander™ 1400 SEL and Speed-Master® 1600 L, and based on proven German technology, the Smart Start™ HFC1 control box provides an easy, convenient system for powering-up Hörmann Flexon high performance doors. This progressive technology reduces installation time and delivers the simple set up system installers and customers want.

REDUCE INSTALLATION TIME

Electrical cables are pre-wired for quick and easy installation. NEMA 4 rated enclosure with standard power requirement of 460v/230v/3 phase/60HZ accommodates a wide variety of applications and the control’s compact dimensions accommodate areas with limited space.

MINIMIZE DOWNTIME

A self-diagnostic display quickly identifies the type of malfunction, and user-friendly diagnostics reduce downtime. A 24/7 watchdog system provides protection from power surges that could damage the system. Its soft start and soft stop minimizes wear to provide a long service life.

DEPENDABLE AND PROVEN

Fourth generation German technology, proven worldwide, provides the product sustainability and durability you are looking for. The HFC1 control box is UL approved and comes with our solid product warranty and promise as a manufacturer that you can trust our products to be there for many years to come.

Hormann-Flexon Speed Commander™ 1400 Sel Clean-Master 20 PA

TIGHT SEALING AND FAST OPERATING SPEEDS

The Speed-Commander™ 1400 SEL Clean-Master 20 Pa tightly seals door openings in clean room applications to prevent air movement, and the fast opening speed of up to 80″ per second greatly increases protection from contamination between two areas. Low-profile steel guide tracks are free of moving parts, promoting a pure environment. Stainless steel guide tracks are available for customers that demand the ultimate in clean.

BUILT-IN LIGHT GRID FOR PROTECTION

Standard on the Clean-Master 20 Pa is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells. The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime. The absence of a coil cord eliminates a possible source of contaminants.

OPTIONAL UPS EMERGENCY BATTERY PACK

A special UPS emergency battery pack is an option that provides peace-of-mind in case of a power failure. If power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area. This low maintenance design is free of springs, counterbalance systems and other high maintenance parts that are typically required for emergency opening. When the battery is low, an alarm sounds to signal time for a replacement. Replacing the battery is a simple process that takes just a few minutes. This option is only available with doors equipped with our 230 v / 1-phase HFCB control box.

SPEC SHEET

Application / Size Range

Application / Size

  • Interior applications up to 10’0″ wide x 10’0″ high.

Operating Speed

  • Opening: Up to 80″ per second.
  • Closing: 30″ per second.

Panel

  • 1/16″ thick puncture resistant, nylon-reinforced PVC material.

Vision

  • Full-width x 35″ high, clear PVC, starting at approximately 52″ from the floor. The panels are connected using aluminum profiles and have specially designed edges that allow the panels to slide easily into the horizontal aluminum profiles for fast replacement.

Colors

  • Orange
  • Blue
  • Yellow
  • Red
  • Gray

Guide Tracks

  • Standard: Heavy-duty, 12 gauge, galvanized steel with removable front covers. Guide tracks are 7-1/4″ wide x 4-1/2″ deep with an 8’0″ high light grid built in.
  • Optional: Stainless steel.

Direct-Drive Motor

  • Compact, self-monitoring direct-drive motor has a patented built-in catch system and is maintenance free.

Control Box

  • Standard: HFCB 1-phase, hardwired. The optional UPS emergency battery pack is only available with doors that are equipped with our 230 v / 1 phase HFCB control box.
  • Optional: HFC1 3-phase, hardwired or Smart Start™ HFC1 3-phase.

Safety Devices

  • Standard: An 8’0″ high light grid built into the guide tracks.

Custom Panel Prints

  • Make an impression with our customized panel prints! Logos, pictures and text may be digitally printed onto our door panels. The images are durable, UV treated and waterproof. The maximum image size is 7’0″ wide x 3’0″ high.